Gear Oil Automatic Trace Moisture Meter Electrolytic Current 0 ～ 400mA ASTM D6304

SH103A Automatic trace moisture meter

SH103A automatic micro water analyzer is an instrument used to detect the moisture content in petroleum products. It has high sensitivity, high precision, high reproducibility, Chinese menu and prompts, easy and intuitive operation, low power consumption and energy-saving design. It is suitable for petroleum, chemical, power, pharmaceutical and other fields, and can measure sample types: solid, liquid, gas.

This instrument adopts the Karl Fischer coulometric titration method, which can reliably determine trace moisture in liquid, gas, and solid samples. During testing, for solids that are insoluble in reagents and substances that are prone to contaminating electrodes and reagent reactions, corresponding solid, gas, and liquid samplers can be used for indirect measurement. It is an efficient and fully automatic analytical instrument. Widely used in industries such as power, petroleum, chemical, pharmaceutical, railway, environmental protection, scientific research institutions, etc.

The relative molecular energy of water is much smaller than that of oil. After gasification, the volume increases sharply, causing an increase in system pressure drop and power consumption. Therefore, the high content in oil can cause fluctuations in device operation and cause tower flushing. And the inorganic salts (Call2, MgCl2) brought in by water will also exacerbate the corrosion of the device

Performance characteristic parameters

● 128 × 64 dot matrix LCD display screen, Chinese character prompts for operation, intuitive and friendly.

● Use electrolyte blank current compensation and electrolyte equilibrium point drift compensation to correct measurement results.

● High electrolysis current, can quickly reach the equilibrium point and enter the testing state.

● Equipped with calendar and clock functions, with a power down storage time of 10 years.

Note: The appearance pictures, dimensions, volume, and weight of the instrument are for reference only. If there are any updates to the instrument, there may be slight changes without prior notice.

Meet the following standards:

1. GB/T 7600 "in operation transformer oil moisture content determination method (coulomb method)"

2. GB 6283 "chemical products in the determination of moisture content Karl Fischer method (general method)"

3. SH/T 0246 "determination of water content in light petroleum products (electric quantity method)"

4. SH/T 0255 "additives and lubricating oil containing additives moisture determination method (electric quantity method)"

5. GB/T 11133 "Determination of water content in liquid petroleum products (Karl Fischer method)"

6. GB/T 7380 "surfactant water content determination (Karl Fischer method)"

7. GB 10670 "industrial fluoromethane in the determination of trace moisture in the Karl Fischer method"

8.GB/T 606 General method for determination of moisture in chemical reagents Karl Fischer method

9. GB/T 8350 "denatured fuel ethanol"

10, GB/T8351 "automotive ethanol gasoline"

11. GB/T 3776.1 "pesticide emulsifier moisture determination method"

12. GB/T 6023 Determination of trace moisture in butadiene for industrial use - Karl Fischer Coulomb method

13. GB/T 3727 Industrial ethylene, propylene determination of trace water

14. GB/T 7376 Determination of trace moisture in fluoroalkanes for industrial use

15. GB/T 18619.1 Determination of water content in natural gas -- Karl Fischer - Coulomb method

16. GB/T 512 "grease moisture determination method"

17. GB/T 1600 -- Determination of pesticide moisture

18. GB/T 11146 "crude oil water content determination method (Karl Fischer coulomb method)"

19. GB/T 12717 "industrial acetate test method"

20. GB/T 5074 Coking products -- Determination of moisture

21. GB/T 18826 Industrial 1,1,2-tetrafluoroethane (HFC-134a)

Moisture meter list